12
3
Dante Controller
12
3
Dante Controller
AES67 Compatibility
Dante devices with AES67 compa�bility will have an ‘AES67 Config’ tab
within the ‘Device View’ window.
Fig 3-16: AES67 Config Tab with AES67 Mode Disabled
This is ‘Disabled’ by default. Select ‘Enabled’ from the dropdown menu to
enable this mode. This op�on will be not be available if the device is part of
a Dante domain. A warning will be displayed asking you to confirm the
change, and that the device must be rebooted before the changes are
made.
Fig 3-17: Warning Message
Click ‘Yes’ to con�nue. Then reboot the unit by clicking the ‘Reboot’ bu�on
in the ‘Reset Device’ sec�on of this tab.
Fig 3-18: Reboot Device