SonicWALL TZ 190 Getting Started Guide Page 11
Sprint Wireless PC Card Setup
Complete the following steps to set up and provision your Sprint Wireless Mobile
Broadband (WWAN) PC card. Contact your PC card vendor for troubleshooting help with
this section.
Alert:
DO NOT insert your PC Card modem into the computer until you have
completed the setup process for your card as described in this section and
successfully accessed the Internet through your PC using the PC Card
modem.
Installing Sprint Software
You must install the Sprint Wireless software that came bundled with your WWAN PC
card before activating the card.
1.
Insert the Sprint CD that is provided with your WWAN PC card into the PC you intend
to use for PC card setup.
2.
Follow the instructions on screen to complete the Sprint software installation.
3.
Restart your computer when prompted.
4.
After restarting your computer, open the Sprint PCS Connection Manager program
(if it does not automatically start).
5.
When the program launches, it will check for updates. Click
Update Now
as needed.
The download and update will proceed (if needed) and the program may restart.
Setting Up the WWAN PC Card
1.
Insert your Sprint WWAN PC Card. You may hear some audible indications of the
card being discovered and installed.
2.
Once installed, you may be prompted to update the firmware on the WWAN PC card.
Click
OK
to proceed with the update and click
Next
to agree to the license terms.
The update will take a few minutes. The WWAN PC Card will be rediscovered during
this process. Click
Finish
when prompted.
3.
When the card is fully rediscovered, you will be prompted to call Sprint PCS
Customer Service to activate the card. Do not click next until prompted to do so by
the Sprint agent.
4.
The Sprint agent will provide you with an Activation Code, and instruct you to enter it
on the next screen. Enter the Activation Code and click
Next
.
5.
If the code is accepted, you will be prompted to enter your phone number (MDN) and
MSID. Verify these numbers with the Sprint agent, and be sure to enter them
correctly. Click
Next
when done.
6.
You will be prompted to confirm the correctness of the numbers. Entering incorrect
information at this stage will require recovery by Sprint Technical Support. Click
Yes
once you have verified the numbers.
