Quick Start Guide
Check Package Contents
Verify that your package includes the following
contents:
SonicWALL TZ 105 or TZ 105W Series Appliance
Ethernet Cable
Standard Power Adaptor and Cord
* Wireless Antennas (2) included with TZ 105W only
3
Connect the SonicWALL TZ 105 series
appliance to the network using standard
Ethernet cables as shown in the illustration.
4
In a Web browser, navigate to
http://www.mysonicwall.com/
If you do not have a MySonicWALL account,
click the
Register Now
link to create an
account.
Under the
Quick Register
section of your
MySonicWALL account, enter the Activation
Key or Serial Number of the SonicWALL TZ
series appliance you are registering.
Confirm your serial number, enter a friendly
name for your appliance, and enter your
authentication code in the
Register Product
section.
Click
Submit
.
2
Using the computer connected to the LAN
port of the SonicWALL TZ 105 series
appliance, navigate to
http://192.168.168.168/
in a Web browser.
You m ay need to configure the computer with
an IP address on the 192.168.168.0 subnet,
such as 192.168.168.20.
The Setup Wizard takes you through several
basic steps to get your SonicWALL TZ series
appliance configured for your network.
Power cord is for use in North America only.
1
Connect the SonicWALL TZ Appliance
Register
Configure the Management Host &
Setup Wizard
SonicWALL TZ Series Appliances
Registration MUST be completed
prior to
connecting to the appliance.
http://www.mysonicwall.com
http://192.168.168.168/
After the Setup Wizard, the appliance may
reboot. Please wait a few minutes while the
appliance reboots to save the updated settings.
*
Connect the included power cable and adaptor,
and plug into an appropriate outlet.
The TZ 105 series appliance powers on and the
orange “test” LED blinks during the boot
sequence. Continue to Step 4 when the “test”
LED is no longer lit.
This process may take up to 2 minutes.
2 min
http://192.168.168.168/
http://192.168.168.168/
(TZ Wireless-N)
LAN /
Ethernet
USB
Internet
Modem / Router
Ethernet
Internet
lan
120V AC
(U.S.)
wan
X1
lan
X0
