SonicWALL SMA 100 Series, Deployment Manual, Page: 7 / 25

7. The
Public Server Configuration Summary page displays all the configuration actions that are
performed. Click Apply to create the configuration and allow access from the WAN to the SMA on
the DMZ.
Allowing an SMA to LAN Connection
When users have connected to the SMA, they need to be able to connect to resources on the LAN.
To allow an SMA to LAN connection:
1. Using SonicOS, navigate to the
OBJECT | Match Objects > Addresses page on the gateway
appliance.
2. In the
Address Objects tab, click +Add .
3. In the
Address Object Settings dialog box, create an address object for the X0 interface IP address
of your SMA appliance:
Name
Name of the SMA appliance
Zone Assignment
SMA
Type
Host
IP Address
SMA appliance X0 IP address (default 192.168.200.1)
4. Click
Save to create the object. Once done, click Close .
5. Click
Add again to create an address object for the NetExtender range.
6. In the
Add Address Object dialog box, create an address object for the NetExtender range:
Name
Name for NetExtender range
Zone Assignment
SMA
Type
Range
Starting IP Address
Start of the NetExtender IP address range (default 192.168.200.100)
Ending IP Address
End of the NetExtender IP address range (default 192.168.200.200)
7. Click
Save to create the object. Once added, click Close .
8. On the
OBJECT | Match Objects > Addresses page, click the Address Groups tab.
SMA 10.2 Deployment Guide for the SMA 100 Series
Connecting the SMA on a New DMZ
7