Sonic KCS-5885Z, Operation Manual

Page: 87 / 114

6-37
6. 10. 2. Display Area Change
The display area in the bearing direction can be changed between 360° and 180°.
When 360° is set, the display area on the screen is 180° from right to left with the center on
the bow bearing. When 180° is set, the display area on the orthogonal screen is 90° from
right to left with the center on the bow bearing.
< Operation procedure >
(1) Press the menu key to open the menu.
(2)
Place the cross cursor over “Screen/Sub Screen,” and press the menu key
to open “Screen/Sub Screen” menu.
(3) Pl
ace the cross cursor over “Orthogonal,” and press the menu key
to
open the “Orthogonal” menu.
(4)
Place the cross cursor over “Display Area,” and press the menu key
to open “Display Area” menu.
(5) Place the cross cursor over the display area item to be used, and press the
menu key to change the display area
Menu
Screen/Sub Screen
Orthogonal
Display Area