80
Wave User Manual
Version 4
13.4.2
General
This tab presents general information of the report. There are four sections:
Customer
Information,
Part
,
Weld Type
and
Weld Dimensions
. Note that the last category is only
present if the weld type is different from
None
. Each category includes parameters that
are specific to it.
Figure 63
–
Part of the section presented in the General tab.
NOTE
: Some sections might be hidden when you glance at the screen.
Do not hesitate to scroll the screen with your finger.
By default, some fields are empty, although a
Source
is selected. In fact, these are the
few parameters that need to be written manually in the report. To do this, all you have to
do is click on the parameter to be modified. A yellow box will appear to indicate the
parameter being modified. In addition, the virtual keyboard will be displayed in the lower
half of the screen. Enter the information you want.
Figure 64
–
Some fields need to be filled in manually using a virtual keyboard
