31
Radian Motion Sensor
User Manual
Document Ref: UM-8041-C1
Issue: C - Rev 1
© Sonardyne International Limited 2007
Fig 24 Select Mapping Mode screen
8. Select
2D Mapping mode
and select
Show graphical representation of re-
sults
.
9. Click
Start
to begin recording measurements.
Fig 25 Data capture screen
10. While continuing to capture data, manoeuvre the vessel or vehicle in a small
circle for approximately two minutes, maintaining a slow but steady speed
throughout the manoeuvre.
You must complete at least one full circle, but you should avoid gathering
too much data during this operation.
11. Click
Stop
when you have completed the circular manoeuvre.
MagField Mapper processes the measurements and displays a
Calibration
Report
. Processing may take some time to complete.
