Initial Issue
Issue Date 25/06/2010
User Manual: 8142/8182 Transceivers
08 Operational Test
Page
2of 6
1 TESTING THE TYPE 8142 AND TYPE 8182 TRANSCEIVERS
NOTE: The NSH will power the transceiver if they are connected.
1.
Check for a valid communications connection, before running the automated test software.
2.
Locate the software, HPT Terminal on the navigation computer.
NOTE: If you cannot the find software in the HPT Terminal check your Installation CD or contact
Sonardyne Int Ltd.
NOTE: When the software is installed it can be located in the Sonardyne directory.
3. Run
the
software.
4.
Type in the Ethernet address, this is located on the NSH or the installation record.
5.
From the menu on the HPT terminal select ‘’NSH’’ and then ‘’Connect’’.
6.
Connect the selected comm. port on the NSH.
7.
Use the connect button to open the Select Port window. (Ref.
screen shot 1
).
Select Port Window
Screen Shot 1
8.
Do not change any options on the Select Port screen. If required change the ‘’Select port type’’ to the
com port that is being used.
9.
When connected a communications window will open (Ref.
screen shot 2
).
Summary of Contents for 8142-000-01
Page 100: ......
