P
reparing the c
a
mera
GB
55
Shooting a clear image without camera
shake
“Camera shake” refers to unwanted movement of the camera that occurs
after the shutter button has been pressed, resulting in a blurred image.
To reduce camera shake follow the instructions below.
Notes
• The camera shake warning indicator does not appear in the following situations:
– The exposure mode is set to M/S, or during movie recording.
– When the viewing mode is set to [No Disp. Info.], [Level], or [Histogram].
This camera is equipped with a camera shake compensation function to
reduce camera shake. You can activate or deactivate the function for
shooting still images and shooting movies separately. The default setting is
[On] for shooting still images, and [Off] for shooting movies.
MENU button
t
(Camera Settings) 8
t
[
SteadyShot]/
[
SteadyShot]
t
Select the desired setting
Notes
• The SteadyShot function may not work optimally when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed all the way down without stopping halfway.
• When using a tripod, deactivate the SteadyShot function because there is a potential
for malfunction of the SteadyShot function.
Camera shake warning indicator
In situations where the camera may be
subject to camera-shake, the
(Camera shake warning) indicator
flashes. In this case, use a tripod or the
flash.
Using the SteadyShot function
(Camera shake warning)
indicator
