SOMNOmedics SOMNOtouch RESP eco, Instruction Manual

Page: 21 / 54

- 21 -
5.5.2 Define TIB (Time in Bed)
Set the Lights OFF and Lights ON Markers
The markers “Lights OFF” (patient in bed) and “Lights ON“ (patient out of bed) define the relevant
analysis data.
-
Set Lights OFF: Right click on the raw data area at the time the patient goes to bed (check
body position, activity or marker)
→ select ”Lights off”
-
Set Lights ON: Right click on the raw data area at the time the patient gets out of bed (check
body position, activity or marker)
→ select “Lights on”
Note: There should be only on
e “Lights OFF” and “Lights ON” marker in the recording.
Go to Tools
→
Edit markers and click on the symbol right beside the requested marker to
delete the marker. If you do not set a marker, the complete recording will be defined as TIB.
5.6 Enter the Findings and the Diagnosis
Select Patient Info in the Tools menu
→
left click on the tab sheet Diagnosis
→
enter the Findings and the Diagnosis in the corresponding text fields
The Choose Finding and Choose Diagnosis buttons offer lists of
selectable predefined findings and diagnosis.
5.7 Open the Report
Open the Report Selection by clicking on
“Report...“
in the
“Report“
menu.
Select the respiratory or the CPAP template and click on the View Button.
Note: Only events during TIB will be evaluated in the report.