manualshive.com logo in svg

SOMNOmedics SOMNOscreen plus, Instruction Manual, Page: 55 / 57

Share
Download
SOMNOmedics SOMNOscreen plus Instruction Manual Download Page 55

 

 

 

- 55 - 

8.3  Malfunctions 

In the  event  of  a  problem  with the 

SOMNOscreen™ plus, switch it off and ensure that it is removed 

from use and clearly labelled. 
 
 The following are examples where this may be necessary:  
 

- 

The device is visibly damaged (broken case) 

- 

The device does is not work correctly (poor measurements) 

- 

Components are loose or fit poorly 

- 

Connectors are damaged (crushed or cut cables) 

 
Please  contact  your  local  distributor  for  a  fast  response  or  contact  SOMNOmedics  for  a  fast  and 
efficient response. Please see chapter 8.7.

 

 
 

 

8.4  Warranty 

SOMNOmedics will only guarantee the Safety, Reliability and Operation of the 

SOMNOscreen™ plus 

under the following conditions: 
 

- 

Updates, modifications or repairs are only executed by authorized distributors or SOMNOmedics. 

 

- 

The device is operated only by trained and qualified personnel. 

 

- 

The device is transported in original packaging only. 

 

- 

The device is stored in a suitable environment. 

 

- 

The device is used according to the instruction manual and all safety instructions are followed. 

 
The Warranty only covers the 

SOMNOscreen™ plus Unit. The System is guaranteed for 24 months. 

 
 
 

8.5  Accessories and Spare Parts 

Please request our latest catalogue from your local Distributor or contact SOMNOmedics. See chapter 
8.7. 
 
 
 

8.6 

Disposal of Parts, Batteries or the 

SOMNOscreen™ plus Device 

Used or replaced parts and devices must be disposed of according to local regulations for 
environmental protection. 
 
For the disposal of batteries, please refer chapter 7.3. 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SOMNOscreen plus


























































Reviews:

No comments