Description
5
parallel proximity to mains power cables. Shielded TP cables can be used to
improve EMI problems, which is worsen in long transmission.
Because the quality (AWG and also shielding) of TP cables have a major
effect on the transmission length limit and how good the received picture
quality is, the actual transmission
range is subject to one’s choice of CAT
cables
Do not disassemble the device for any reason. Doing so will void the
product warranty. Also, our unique case is an integral part of the design of
this unit and is responsible for cooling and circuitry shielding. Any
modifications to this case will potentially cause malfunction and product
failure.
Personnel qualification
The instructions are intended for assembly and configuration personnel. The
following knowledge is required by assembly and configuration personnel:
•
Knowledge in computer, network and media technology
•
Knowledge and experience in assembly and configuration
Description
Scope of delivery
Depending on the order, the following may be included the scope of delivery:
•
DVM-HDBT-EX07-T
•
DVM-HDBT-EX07-R
•
RS232 adapter-cable, Euroblock
–
Sub-D09
•
IR receiver cable with ⅛" Minijack, 5 V
•
Power supply (24 V/1A DC, Screw Connector)
•
IR emitter cable with ⅛" TRS Minijack, 5 V
•
mounting bracket with PH screws
Necessary accessories
CAT5/CAT6/CAT7 network cable is necessary for connecting the units.
