The Telis Soliris RTS Patio is a hand-held remote to operate awnings, screens and
shutters featuring Radio Technology. It also has the added feature of activating an
RTS sun sensor remotely. The RTS is omni-directional, so there is no need to aim
the remote at the product being controlled.
Telis Soliris 4 RTS Patio
Part Number:
1811243
Introduction - Multi-Channel Remote Control
Up Button
Center “my” Button
Down Button
Programming
Button (PROG)
Wind Only
Sun & Wind
Sun/Wind/Channel
Selector
Telis Soliris 4 RTS Patio with Sun/Wind function
Back
Programming a new remote
1. With the current remote press the Channel Selector Button. Each channel operates a single window
or group of window coverings. LED lights will illuminate, indicating which channel is being operated.
2. Using a paper clip, pen or similar device, press and hold the Programming Button on the back of your
current remote until your window shade moves up and down quickly.
3. On the new remote, select a channel to assign the window covering to. Using a paper clip, pen, or
similar device, press and hold the Programming Button on the back of the new remote. The window
shade will move up and down quickly.
4. The new remote is now programmed to operate your window covering.
Programming and Operating
Continued On Next Page
page 1 of 3
Note: repeat process for the other
window coverings/channels.
