SOMFY Sunea 40 RTS DC, Instructions Manual

Page: 8 / 88

EN Sunea 40 RTS DC
8 Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved.
2.3.Commissioning
Identifying the steps to follow
The end limit setting depends on the type of motorised product:
Step 1: Pre-programming the control point [
}
9]
Step 2: Checking the direction of rotation [
}
9]
For a motorised
product with upper end
stops
The end limits must be set in semi-automatic
mode.
For a motorised
product without upper
end stops
The end limits must be set in manual mode.
Step 3 a:
Setting the end limits in semi-automatic mode
(for a motorised product with upper end stops)
[ } 9]
Step 3 b:
Setting the end limits in manual mode [ } 9]
Step 4: Programming the control point [ } 10]
Use and maintenance [
}
14]
NOTICE
For information about the compatibility of the drive with the motorised product and accessories, contact the product
manufacturer or Somfy.
5113030C_Sunea 40 RTS DC.pdf 8 10/19/2020 5:49:32 PM