J4 WT Protect Drive
Full installation guide
16/30
[ Click here to return to contents ]
Copyright © 2017 SOMFY ACTIVITES SA. All rights reserved.
Non contractual images.
4. INSTALLATION IN AN EVB
4.2. ASSEMBLY IN A HEAD RAIL
Details of assembly in each type of head rail are given on a single sheet.
The assembly procedure for the desired head rail can therefore be printed
out on one page for ease of display.
LIST OF HEAD RAILS:
58 mm x 56 mm head rail, open at the bottom
& and 57 mm x 51 mm head rail, open at the bottom
57 mm x 51 mm head rail, open at the top
& 58 mm x 56 mm head rail, open at the top
57 mm x 51 mm head rail, open at the top
78 mm x 67 mm head rail, open at the bottom
Assembly with J406 and J410 drives
78 mm x 67 mm head rail, open at the bottom
67 mm x 66 mm head rail, open at the bottom
4.1. CUTTING THE HEAD RAIL
To assemble a drive in a head rail that is
open at the
top
, a cut must be made so that the mushroom and/
or its extensions can pass through the head rail. This
cut must have the following dimensions (in mm):