The
EOLIS sensor RTS
is a radio sensor for awnings with a protection against
wind damage.
The wind threshold can be set directly on the
EOLIS sensor RTS.
The
EOLIS sensor RTS
has to be used with the
OREA RTS
and
ALTUS RTS
motors.
®
Mains supply : 220-240 V~ 50/60 Hz
Protection index : IP34
Operating temperature : -20°C to +50°C
Class II product once installed
(Find in annex the CE declaration of conformity)
inteo
EOLIS sensor RTS
INSTALLATION
guide
Ref.9000839
Installation:
1
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,,,,,,,
,,,,,,,,,
,,,,,,,,,
,,,,,,,,,
,,,,,,,,,
,,,,,,,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
,,,,,,
Press
more than 2 seconds
on the programming button of
a RTS control which is already
memorized in the motor.
(please refer to the installation guide of
the concerned motor).
Press
briefly
on the
“prog” button of the
EOLIS sensor RTS.
➜
236 mm
160 mm
Connect the cable
to the terminal.
Put the
cover
Fix the sensor
to the wall.
Put and screw
the front box.
MAINS
230V - 50Hz
2 wires x 0,75 mm
2
Neutral
Phase
>2 sec.
prog
The motor must be in its learning mode to record an
EOLIS sensor RTS
.
Up to three
EOLIS sensors RTS
can be memorized in a motor and one
EOLIS sensor RTS
can be memorized in several motors.
Programming:
2
Characteristics
Mounting
Cabling
The awning moves shortly
(DOWN/UP).
the motor is in “learning” mode.
Enter the “learning” mode
Record or delete a sensor
The awning moves shortly (DOWN/UP).
If it is a new sensor : it will be recorded in the motor.
If the sensor was already recorded : it will be erased.
Press
more than 7 sec.
on
the “prog” button of the
new EOLIS sensor RTS.
Erase all the sensors and record a new one
The awning moves shortly (DOWN/UP).
the memory of the receiver is cleared (all the
previous sensors are erased) and the new sen-
sor is recorded.
prog
>7 sec.
➜
➜
0165
