The
EOLIS receiver RTS
is a radio receiver for awnings with protection
against wind damage.
The
EOLIS receiver RTS
is compatible with the
EOLIS sensor
,all the
RTS
controls
and the
INIS RT.
Commands are transmitted by radio (frequency 433.42 MHz).
With an
INIS RT
, the functioning of the
EOLIS receiver RTS
is a trip switch type :
▲
, stop,
▼
, stop,…
®
❏
Mains supply : 220-240 V~ 50/60 Hz
❏
Protection index: IP 44
❏
Operating temperature: -20°C to +50°C
❏
Class II product once installed
❏
Normally polluted environment
inteo
EOLIS receiver RTS 2
INSTALLATION
guide
Ref.5003510
Characteristics:
Installation:
2
Before connecting the unit, you must read the instructions carefully.
▲ ▼
N N L
SC
Programming
button
LED
Built-in manual
security control
1
Mounting of the EOLIS receiver RTS 2 :
A
Recommendations :
❏
Install the EOLIS receiver RTS with the cables entry pointing downwards
to avoid water infiltration.
❏
Do no install the eolis receiver RTS against a metallic part
(it could affect the radio transmission).
❏
minimum distance between the receiver and the floor :
1,5 m
.
❏
minimum distance between the receiver and the roof :
30 cm
.
❏
minimum distance between the receiver and the transmitter :
30 cm
.
❏
minimum distance between two receivers :
20 cm
.
Hereby, SOMFY, declares that this equipment is in
compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
A Declaration of Conformity is available at the web
address
www.somfy.com Heading CE
150 mm
150 mm
40 mm
