![background image](http://html.mh-extra.com/html/somfy/animeo-ib-4-zone-touch-building-controller/animeo-ib-4-zone-touch-building-controller_manual_1317459007.webp)
animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 7
1.10 Define number of zones
Specify how many sections/zones the project is divided into (1 - 4/1 - 8). You can also designate individual
zones.
Examples of how to define a zone or section:
You have a project with the following layout and 5 motorized products (roller shutters, venetian blinds, etc.):
Example 1
1 to 5 are exterior Venetian blinds: Since there are two façade fronts facing different directions, two zones
seem to be the best option in this case. For anyone wishing to set up completely independent automatic
functions on a single façade front (for example different switching times for bedrooms, office, conference
room, etc.), this façade front can be split into multiple zones.
Example 2
1 and 2 are roller shutters, while 3 to 5 are exterior Venetian blinds: Since you have roller shutters and one
exterior Venetian blind installed on the east-facing façade, you should ideally split this front into two zones. In
this example, you therefore have three zones. But why split up the east-facing façade? As you typically ena-
ble a wind alarm for the Venetian blind and not for the roller shutters. Aside from this, you wish to move the
Venetian blind to a position with subsequent slat turning in the event of direct sun. In the case of a roller
shutter, there is no slat turning, only an up/down command.
1.11 Learn Zones
After you have checked the wiring of the motor controllers and set up the zones correctly, you can now
assign the motor controllers/drives to the zones. You can choose between standard assignment and
advanced assignment here.
Procedure 1:
1.
Use the white arrows to select the section/zone (1 - 4/1 - 8).
You can also tap on the zone field
(1 – 8) directly.
2.
Enable programming mode by pressing "START".
All LEDs on the motor controller now flash in circu-
lation to indicate that the unit is ready for programming mode. With the Smoove UNO IB+, the LED
flashes in various colors. To assign the corresponding motorized product to the selected zone, press the
connected button or the programmed remote control on the motor controller. Local operator functionality
is integrated with the Smoove UNO IB+. On the animeo IB+ motor controller, however, it needs to be
connected. With the 4-unit animeo IB+ motor controller with pluggable radio receiver, you can even use
the remote control.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......