animeo IB+
4 Zone/8 Zone TouchBuco BACnet
2020/04/30
Seite 4
1 Wizard
1.1 Select
If you wish to make the setting in a step by step process, please select "Wizard". If you select "Main Menu",
you have access to all adjustment options.
1.2 Locals
Select the menu language. You can set the units either automatically (= Auto units enabled) or manually.
1.3 Date/Time
Here you set the time, date and time zone. Navigate through the time zones by using the grey arrows. The
UTC (Universal Time Clock - with no summer or winter time) is used as the reference time. When using the
Compact Sensor
,
the time can automatically be synchronized by the integrated GPS receiver.
Hit "Apply" to confirm the entries.
H
The correct setting is necessary when using the timer function with dusk activation, as well as the sun
protection function with sun-tracking. You can access all global zones using the magnifying glass.
1.4 Location
Enter your geographical location.
H
This entry is necessary if you wish to use the defined dusk time for switching times with timer functions
(with or without disabling function). When using a fixed switching time, this is not necessary.
This entry is also required if you use sun tracking for the sun protection function. When using a fixed position
and/or an angle, this is not necessary.
You can find the longitude and latitude for your location via the Internet, for example via "Google Maps":
Step 1: Navigate to http://maps.google.com via your web browser
Step 2: Enter your location
Step 3: Right-click on the icon and select "What is here?"
Step 4: Read off the longitude and latitude (up to 2 places after the decimal point)
and enter it in the TouchBuco: Latitude: 48.48° longitude: 8,95°
1.5 Installation Test
Here you can check whether all motor controllers (potentially motor controllers with integrated operator but-
ton, such as Smoove UNO IB+) are correctly connected. Please work your way through the commands from
"Step 1" to "Step 3" one after the other. A visual inspection of the entire sun protection system is required
after each step. If the end products/motorized products are not moved to the position where they should be
according to the functional description in the display, have your system re-checked by the installation techni-
cian.
It is important to always complete the procedure with step 3, as the local controls (buttons in the room) will
otherwise be locked. You may need to execute this command several times to ensure that all end prod-
ucts/motorized products have ultimately moved to the limit switch position of their drive.
Summary of Contents for animeo IB+ 4 Zone Touch Building Controller
Page 49: ......