Somatik Labs SLS-UVB05, User Manual

Page: 9 / 20

7
6. For your safety, the SLS-UVB05 sanitiser comes with
a built-in safety switch. If the bag is opened during
the sanitising process, sanitising is paused and will
resume after the bag is closed.
7. To save power the bag will go into Standby Mode
if no operation is performed for more than 60
seconds.
PLEASE NOTE
Phones, devices, and other objects for sanitising
must be clean of any dirt or debris to ensure they are
properly sanitised. Only surfaces that are exposed to
the UV light can be sanitised.
7.1 QUICK CLEAN - 3 MINUTE MODE
1. The Sanitise Mode button will show solid white
indicating the device is Powered ON.
2. Quick press the Sanitise Mode button to start the
Quick Clean process.
3. The Sanitise Mode button will start blinking white
light for 3 minutes.
4. After the sanitising is complete, the Sanitise Mode
button will turn to solid white.
5. The sanitise process can be canceled at any time
during operation by pressing the Sanitise Mode
button.