37
•
Cleaning (this function only appears with the machine in Off)
This feature allows you to
clean
the burning basket manually. Press “set”; the “ok”
option appears. Press “ok” to start the cleaning procedure; the “Habilitada” (Enabled)
message is displayed. To stop, press “ok”. Press the “+” key to go to the “Técnico”
(Technical) menu.
Press the “esc” key and then “+” once to switch to the “Active Pump” menu.
•
Active Pump (this function only appears with the machine in Off)
This function allows the
water pump
to be driven manually. Press “set” and the
message “enabled” appears.
Press the “esc” key once and then “+” to go to the “Technical Menu” menu.
The technical menu is not available to the end user.
9.1.8.
Technical Menu
This feature allows the user to adjust the unit's different variables. Pressing “set”
displays the “password” menu to enter the technical menu.
ON
OFF
+
OK
MENU
MODE
ESC
-
MAN
AUT
esc
----------
Set
Activa Bomba
>
<
Summary of Contents for Hidro 12
