ASSEMBLY INSTRUCTIONS FOR PACIFIC RIM WATER RING
(for manual lit Hemi 36 firepit)
WARNING!
Some pieces are heavy with sharp edges. Use extreme care when lifting and assembling.
OUCH!
Watch for sharp edges.
Fire Features
1
version: 2019.11.14
DANGER! HEAVY!
Lift pieces with care.
Thanks for purchasing a Solus
PACIFIC RIM water ring.
This manual provides instructions on
how to insert a PACIFIC RIM water ring
into an
existing HEMI 36 firepit (manual
light).
If you are setting up a whole sys-
tem from scratch, please read the full
HEMI INSTALLATION &
OPERATIONAL MANUAL first and use
this as a supplemental guide.
IMPORTANT!
TURN OFF MAIN GAS SUPPLY AND
ELECTRICITY (if you have an electric
start) BEFORE INSTALLING THIS PROD-
UCT.
GENERAL TIPS:
Your HEMI firepit will need to be level
in both directions.
Use shims at bottom of bowl to
achieve this.
Vacuum all debris off burner plate.
The tank needs to sit flat and level on
the burner plate.
You will need a drill, screwdriver and
wire strippers as well as a level and
some shims.
OUTDOOR USE ONLY.
0558
EN 509:2000
EN 60335-1:2001
CE / CSA & ANSI
CERTIFIED
ANSI Z21.97-2014
CSA 2.41-2014
