67FV1
12
2-4.1 J2 SWITCH SIGNAL SUMMARY
HDD INDICATOR LED (PIN1 ~ PIN4)
• This connector connects with the hard disk indicator LED on the case.
INFRARED PORT MODULE CONNECTOR (PIN6 ~ PIN10)
• The system board provides a 5-pin infrared connector for an optional wire-
less transmitting and receiving module. Pin 6 through pin 10 are Transmit,
GND, Receive (low speed), Receive (high speed) and Vcc, respectively.
POWER SWITCH (PIN12 ~ PIN13)
• Toggle pin 12 and pin 13 for turning ON/OFF of the power supply. (For ATX
power only)
SUSPEND CONNECTOR (PIN14 ~ PIN15)
• This allows user to manaully place the system into a suspend mode or
“Green” mode, where system activity is decreased to save electricity and
expand the life of certain components when the system is not in use. This
N.C.
Empty
11
Power Switch
GND
12
Power Switch for ATX
13
Suspend Connector
GND
14
Suspend Signal
15
Infrared Connector
6
7
8
Infrared Transmit Signal
GND
Infrared Receive Signal
(Low Speed)
9
Infrared Receive Signal
(High Speed)
10
+5V
N.C.
5
Empty
HDD LED Connector
1
2
3
4
J2
Pin
Signal Description
+5V
HDD LED Signal
HDD LED Signal
+5V