38
IR Transmition
Delay
Enabled: Enabled delay when
transfers data.
Disabled (default) Disabled delay
when transfers data.
Onboard Parallel
Port
Choose the printer I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
Parallel Port Mode
Choose SPP (default), ECP + EPP
EPP, or ECP mode. The mode
depends on your external device
that connects to this port.
ECP Mode Use
DMA
Choose DMA3 (default) or DMA1.
Most sound cards use DMA1.
Check with your sound card
configuration to make sure that
there is no conflict with this
function.
*: This option will not be displayed
unless the EPP/ECP function is
selected..
EPP Mode Select
Choose EPP1.7 (default) or EPP1.9.
EPP1.9 supports hardware
handshake. This setting is
dependent on your EPP device.
Note:
The above 2 options will not
be displayed unless the
EPP/ECP function is selected.
Summary of Contents for SL-67EZ
Page 2: ......