10
Step 6:
Insert the clip portion of the CPU supporter so that the heat
sink can sit on the top of the whole CPU supporter.
Top View of CPU Support Clip
Notice that the base and the clip of CPU Supporter may be
different from the figures shown here.
Jumper Settings
JP2: Keyboard Power Selection
Keyboard Power On
Disabled (default)
Enabled
JP2
1
3
1
3
Note:
1.
If the JP2 is fixed by jumperwire then the board
does not support keyboard power on function.
2.
When the keyboard power on function shows
any compatible problem, choose Disabled and
report the keyboard model to the vendor/maker.
3.
Keyboard power on function must be set from
the BIOS. Refer to the “Integrated Peripherals”
section in the Chapter 3.
Summary of Contents for SL-67EZ
Page 2: ......