20
65ME / 65ME+
CD_IN1
PIN NO.
CD_IN1/CD_IN2: CD-ROM AUDIO CONNECTOR
CD_IN2
PIN 1
Left Channel
GND
PIN 2
GND
GND
PIN 3
Right Channel
PIN 4
GND
Left Channel
Right Channel
A battery must be used to retain the motherboard configuration in CMOS RAM.
NOTE : You can clear CMOS by shorting 2-3 pin when the system is POWER
OFF. Then, return to 1-2 pin position (default). It may damage the
motherboard if clearing the CMOS in POWER ON status. Unplug the
power cord from power supply before clearing CMOS will be a best bet
for user.
Clear CMOS Data
JBAT1/JBAT2: CLEAR CMOS DATA
1 3
1 3
JBAT1
JBAT2
Retain Data (default)
1 3
1 3
JBAT1
JBAT2
This connector connects to a LAN card with a Wake On LAN output. The connector
powers up the system when a wake-up packet or signal is received through the
LAN card.
This feature requires that Wake On LAN feature is enabled at the BIOS “
Power
Management Setup
” and that your system has an ATX power supply with at least
720mA / +5V
standby power.
Connect the Wake On LAN signal from LAN card
to JWOL1
JWOL1 : WAKE ON LAN (WOL) FUNCTION
JWOL1
TAD1
: Telephone Answering Device / Modem connector.
Connects a voice modem to transmit and receive audio signals.
TV1
: TV Tuner connector.
Connects a TV card or second CD-ROM drive.
TAD1 / TV1 is only for
65ME+
TAD1
PIN NO.
TAD1 / TV1 CONNECTOR
TV1
PIN 1
TV_L CHANNEL
PHONE
PIN 2
GND
GND
PIN 3
TADOUT
PIN 4
GND
GND
TV_R CHANNEL