SOLTEK SL-65DV2 User Manual Download Page 6

6

65DVB/65DV2

CHAPTER 1

INTRODUCTION

1-1 ITEM LIST CHECKUP

• Motherboard
• Support CD
• User’s Manual
• Bundle Bonus Pack CD
• Bundle Bonus Pack Manual
• Temperature Sensor Cable
• ATA 66/100 IDE Cable
• FDD Cable

1-2 CPU

• Supports Intel

®

 FC-PGA Pentium !!!

TM

 up to 1GHz or above.

• Supports Intel

®

 FC-PGA 370 Celeron & PGA 370 Celeron up to 766MHz

or above.

• Supports VIA  Cyrix !!! up to 600MHz.
• Supports CPU voltage Auto-Detect circuit.

1-3 CHIPSET

• North Bridge - VIA VT82C693A APOLLO PRO-PLUS.
• South Bridge - VIA VT82C686A (for 65DVB only)
                          VIA VT82C686B (for 65DV2 only)

1-4 ADVANCED HIGH-PERFORMANCE DRAM

      CONTROLLER

• Supports FP, SDRAM, VCM memory types up to 3 DIMMS.
• 64-bit data width and 3.3V DRAM interface.
• Supports up to 768MB memory space.
• Different DRAM types may be used in mixed combinations.
• PCI-2.2 compliant, 32 bit 3.3V PCI interface with 5V tolerant inputs .
• DRAM interface synchronous with host CPU (66/100/133 MHz) or AGP

(66MHz) for most flexible configuration.

• DRAM interface may be faster than CPU by 33MHz to allow use of PC100

Summary of Contents for SL-65DV2









































































Reviews: