49
56H5 / 56H1
4-7.9 IDE HDD AUTO DETECTION
IDE HDD Auto Detection detects the parameters of an IDE Hard Disk
drive and automatically enters them to the Standard CMOS Setup
screen.
The screen will ask you to select a specific Hard Disk for Primary
Master after you selected this option. If you accept a Hard Disk
detected by the BIOS, you can enter “Y” to confirm and then press
<Enter> to check next Hard Disk. This function allows you to check
four Hard Disks and you may press the <ESC> after the <Enter> to
skip this function and go back to the Main Menu.
4-7.10 SAVE & EXIT SETUP
Save & Exit Setup allows you to save all modifications you have
specified into the CMOS memory. Highlight this option on the Main
Menu and the following message appears:
SAVE to CMOS and EXIT (Y/N)? Y
Press <Enter> key to save the configuration changes.
4-7.11 EXIT WITHOUT SAVING
Exit Without Saving allows you to exit the Setup utility without saving
the modifications that you have specified. Highlight this option on the
Main Menu and following message appears:
Quit Without Saving (Y/N)? N
You may change the prompt to “Y” and press the <Enter> key to leave
this option.