35
listed system peripheral devices or IRQs wakes up the
system.
HDD & FDD
When On of HDD & FDD, any activity from one of the
listed system peripheral devices wakes up the system.
DMA / master
When you are On of DMA / ISA Master, any activity
from one of the list system peripheral devices wakes
up the system.
Modem Ring
An input signal on the serial Ring Indicator (RI) line (in
Resume
other
words,
an incoming call on the modem)
awakens the system from a soft off state.
RTC Alarm
When Enabled, your can set the date and time at
Function
which the RTC (real-time clock) alarm awakens the
system from Suspend mode.
Primary INTR
When set to On, any event occurring at will awaken a
system which has been powered down.
The following is a list of IRQ’s, Interrupt ReQuests, which can be exempted
much as the COM ports and LPT ports above can. When an I/O device wants
to gain the attention of the operating system, it signals this by causing an IRQ
to occur. When the operating system is ready to respond to the request, it
interrupts itself and performs the service. When set On, activity will neither
prevent the system from going into a power management mode nor awaken it.
IRQ3 (COM 2 )
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 ( PS / 2 Mouse )
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved).
Note:
These functions can only be activated when the power
management option is Enabled
3. Press <ESC> and follow the screen instructions to save or disregard
your settings.