Hardware Installation
5
CPU Type
VCore
Pentium (P54C), 6x86, K5
3.52V
MMX (P55C)
2.8V
6x86L
2.8V
K6-166/200, 6x86MX (M2)
2.9V
K6-233 (or higher)
3.2V
Note:
1.
Refer to the table above to choose the correct voltage
for the CPU everytime that you install a CPU.
2.
CPU V
I/O
is fixed on 3.3V.
3.
Make sure that your JP1 and JP2 are matched with
the CPU voltage, otherwise will damage the CPU or
make the system unstable.
4.
When the new CPU is announced and is not listed
on this manual, please refer to the above table, select
the correct voltage setting for it.
JP1: Single/Dual Voltage Select Jumper
JP1 is an jumper to use to select either single or dual CPU
voltage. This jumper is designed to use with JP2 together in
order to set the correct CPU voltage.
Incorrect
combinations may cause the system unstable or damage
the CPU.
CPU
JP1
Note
MMX, K6, 6x86L,
6x86MX (M2)
1
Dual Voltage
Pentium, K5, 6x86
1
Single Voltage
Summary of Contents for SL-55D2
Page 2: ...Contents iii...
Page 5: ......