manualshive.com logo in svg

SOLTEK SL-54A2, Manual, Page: 49 / 51

Share
Download
SOLTEK SL-54A2 Manual Download Page 49

Award BIOS Setup 43

Onboard Serial
Port 2

Choose Auto (default), 3F8/IRQ4 ,
2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, or
Disabled.

UR2 Mode

Choose Standard (default), IrDA1.0,
ASKIR, MIR 0.57M, MIR 1.15M, or
FIR.

UR2 Duplex
Mode*

Choose Half (default), or Full.
Half: DoesnÕt transmit and receive

activities at the same time.

Full: Transmit and receive

activities at the same time.

*:  This option wonÕt work unless UR2

Mode IrDA/AASKIR/MIR/FIR is
selected.

Onboard Parallel
Port

Choose the printer I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5

Onboard Parallel
Mode

Choose SPP (default), ECP + EPP,
EPP, or ECP mode.  The mode
depends on your external device
that connects to this port.

ECP Mode Use
DMA*

Choose DMA3 (default) or DMA1.
Most sound cards use DMA1.
Check with your sound card
configuration to make sure that
there is no conflict with this
function.

*: This option will not be displayed

unless the EPP/ECP function is
selected..

3. Press <ESC> and follow the screen instructions to save or

disregard your settings.

Summary of Contents for SL-54A2




















































Reviews:

No comments