manualshive.com logo in svg

SOLTEK SL-54A2, Manual, Page: 43 / 51

Share
Download
SOLTEK SL-54A2 Manual Download Page 43

Award BIOS Setup 37

A short description of screen options follows:

Power
Management

Choose Max. Saving, User Define,
Disabled (default), or Min Saving.

PM Control by
APM

Choose Yes or No (default).  You
need to choose Yes when the
operating system has the APM
functions, choose No otherwise.

Video Off Method

Choose Blank , DPMS, or V/H
Sync+Blank (default).  You can
chose either DPMS or V/H
Sync+Blank when the monitor has
the Green function.  You need to
choose Blank when the monitor
does not have the Green function.

Note: Some VGA cards donÕt allow

V/H Sync to be turned off
directly.

Modem Use IRQ

Assign the IRQ number to the
modem which is being used so that
the ring signal can wakeup the
system.  The default setting is 3
(COM2).

Doze Mode

This option sets the CPU speed
down to 33MHz during this mode.

Standby Mode
Suspend Mode

These two options allow you to
choose the mode for the different
timers.  The Standby Mode turns off
the VGA monitor, and the Suspend
Mode turns off the CPU and saves
the energy of the system.

Summary of Contents for SL-54A2




















































Reviews:

No comments