SOLTEK SL-54A2 Manual Download Page 4

Page: 4 / 51

CPU 2.0X Clock Setting (Red Caps) --------------------------------

Intel Pentium Ð 120/133 CPUs ---------------------------------

CPU 2.5X Clock Setting (Red Caps) --------------------------------

Intel Pentium Ð 150/166 CPUs ---------------------------------

CPU 3.0X Clock Setting (Red Caps) --------------------------------

Intel Pentium Ð 180/200 CPUs ---------------------------------

Cyrix 6x86 CPUs -----------------------------------------------------------

CPU 2.0X Clock Setting (Red Caps) ------------------------------

Cyrix 6x86 Ð PR120+/PR133+/PR150+/PR166+/PR200+
CPUs----------------------------------------------------------------

AMD CPUs ------------------------------------------------------------------

AMD K5 Ð PR75/PR90/PR100/PR120/PR133 CPUs (Red
Caps) ---------------------------------------------------------------------

AMD K5 Ð PR150/PR166 CPUs (Red Caps) -------------------

CPU Voltage Setting -------------------------------------------------------

Single Voltage Settings (Green Caps) ----------------------------

For Intel Pentium P54C Family, Cyrix 6x86 Family,
AMD K5 (PR75 ~ PR166) Family ----------------------------

Dual Voltage Settings (Green Caps) -----------------------------

For Intel Pentium MMX (P55C) Family, Cyrix 6x86L/M2
Family, AMD K6 Family --------------------------------------

System Memory Configuration-----------------------------------------

Jumper Settings -------------------------------------------------------------

JP10, JP11: Bus Ratio Select ----------------------------------------

JP6: Clear CMOS Data ----------------------------------------------

JP8: ISA Clock Select ------------------------------------------------

JP2, JP3, JP4: External Bus Frequency Select-------------------

Connectors -------------------------------------------------------------------

KB1: Keyboard Connector -----------------------------------------

MS1: PS/2 Mouse Connector -------------------------------------

PRT: Parallel Port ----------------------------------------------------

COM1 /COM2: Serial Port Connectors ------------------------

FDC: Floppy Drive Connector ------------------------------------

Summary of Contents for SL-54A2




















































Search results

Summary of Contents for SL-54A2

Reviews:

SOLTEK SL-54A2, Manual, Page: 4 / 51

Search results

Summary of Contents for SL-54A2

Reviews: