SOLTEK SL-53D5-S User'S Manual & Technical Reference Download Page 34

Award BIOS Setup 29

Video Off Method

Choose Blank , DPMS, or V/H
Sync+Blank (default).  You can
chose either DPMS or V/H
Sync+Blank when the monitor has
the Green function.  You need to
choose Blank when the monitor
does not have the Green function.

Note: Some VGA cards donÕt allow

V/H Sync to be turned off
directly.

Conserve Mode

Use the default setting.

MODEM Use IRQ

Assign the IRQ number to the
modem which is being used so that
the ring signal can wakeup the
system.  The default setting is 3
(COM2).

HDD power Down

Time is adjustable from 1 to 15
minutes.  When the set time has
elapsed, the BIOS sends a command
to the HDD to power down, which
turns off the motor.

Doze Mode

This option sets the CPU speed
down to 33MHz during this mode.

Suspend Mode

This option allows you to choose
the mode for the different timers.
The Standby Mode turns off the
VGA monitor, and the Suspend
Mode turns off the CPU and saves
the energy of the system.

VGA

Enabled:

the system can not enter
the power saving mode
when monitor is on.

Disabled: the system can enter the

power saving mode
when monitor is on.

Summary of Contents for SL-53D5-S













































Reviews: