manualshive.com logo in svg

SOLTEK SL-53A2, User'S Manual & Technical Reference, Page: 30 / 44

Share
Download
SOLTEK SL-53A2 User'S Manual & Technical Reference Download Page 30

30

A short description of screen options follows:

CPU Internal
Cache

Choose Enabled (default) or
Disabled.  This option allows you to
enable or disable the CPUÕs internal
cache.

External Cache

Choose Enabled (default) or
Disabled.  This option allows you to
enable or disable the external cache
memory.

Quick Power On
Self Test

Choose Enabled (default)or
Disabled.  This option allows you to
speed up the Power On Self Test
routine.

Boot Sequence

Default is ÒA, C, SCSIÓ.  This option
determines which drive to look for
first for an operating system.

Swap Floppy Drive

Choose Enabled or Disabled
(default).  This option swaps floppy
drive assignments when it is
enabled.

Boot Up Floppy
Seek

Enabled:  During POST, BIOS
checks the track number of the
floppy disk drive to see whether it
is 40 or 80 tracks.

Disabled (default):  During POST,
BIOS will not check the track
number of the floppy disk drive.

Boot Up NumLock
Status

Choose On (default) or Off.  This
option lets user to activate the
NumLock function at boot-up.

Summary of Contents for SL-53A2













































Reviews:

No comments