46
B7A-F
3-3 To Verify 6-channel Audio Configuration
1. Connect your on-board Audio Connector to your 6-channel speakers
as depicted in the figure below:
After installation of AC’97 6-channel Codec(AC’97 Driver is already
packed in the nVIDIA nForce2 All-in-1 Driver), you must configure the
5.1 Speaker connection to enable the 6-channel audio.
2. After Connection is done,
s t a r t y o u r W i n d o w s a n d
double click the speaker
icon in the taskbar to enter
volume configuration:
double click
Orange Connector
to Center/ Subwoofer Speaker Out
Green Connector to Front Speaker Out
Black Connector to Rear Speaker Out
3-3.1 To verify 6-channel Audio on Volume Control