manualshive.com logo in svg

SOLTEK 82440FX, User Manual, Page: 26 / 39

Share
Download
SOLTEK 82440FX User Manual Download Page 26

26

Typematic Rate
(Chars/Sec)

Range between 6 (default) and 30
characters per second.  This option
controls the speed of repeating
keystrokes.

Typematic Delay
(Msec)

Choose 250 (default), 500, 750, and
1000.  This option sets the time
interval for displaying the first and
the second characters.

Security Option

Choose System or Setup (default).
This option is to prevent
unauthorized system boot-up or use
of BIOS Setup.

PCI/VGA palette
Snoop

Choose Enabled or Disabled
(default).  It determines whether the
MPEG ISA cards can work with
PCI/VGA or not.

OS Select for
DRAM>64MB

Choose Non-OS2 (default) or OS2.
This option allows you to access the
memory that is over 64MB in OS/2.

Video BIOS
Shadow

Enabled (default):  Map the VGA
BIOS to system RAM.
Disabled:  DonÕt map the VGA BIOS
to system RAM.

C8000-CBFFF to
DC000-DFFF
Shadow

These options are used to shadow
other expansion card ROMs.

3. Press <ESC> and follow the screen instructions to save or

disregard your settings.

Summary of Contents for 82440FX








































Reviews:

No comments