SOLTEK 75FRN2 Series Manual Download Page 5

8

 Series 75FRN2: 75FRN2, 75FRN2-L, 75FRN2-R, 75FRN2-RL

Topics included in this chapter are:
1-1 Mainboard Layout
1-2 Mainboard Specifications**
1-3 Mainboard Specification Table
1-4 Chipset System Block Diagram

  Introduction

Chapter 1 Specification

 This series features an integration of the powerful AMD processors

Athlon/Athlon XP/Duron and the North Bridge nVIDIA nFORCE2 Ultra
400 (nFORCE2 SPP) plus South Bridge nFORCE2 MCP, with which
the whole system performance supports 400/333/266/200MHz system
bus.

 nVIDIA nFORCE2 Ultra 400 (nFORCE2 SPP) plus nFORCE2 MCP

supports on-board AMD processors to implement the 400/333/266/200
MHz Front Side Bus, the AGP 8X/4X interface, the LPC Super I/O, the
Dual-channel DDR 400/333/266 MHz SDRAM, the 6-channel AC’97
Audio interface, the USB 2.0 interface and ATA 133/100/66 data trans-
fer rate.  This chapter is to introduce to users every advanced function
of this high performance integration.

**  If any difference is found between this manual and the Main-
board you are using, please look up the ERRATA/UPDATE Slip
enclosed inside for the correction or updated information, or
else  contact the Mainboard Dealer or visit our Web Site for the
latest manual update.

Summary of Contents for 75FRN2 Series




















































































Reviews: