65KV
34
Choose Max. Saving, User Define (default), Disabled, or
Min. Saving.
Power Management
Choose Yes (default) or No. You need to choose Yes when
the operating system has the APM functions, otherwise
choose No.
PM Control By APM
Choose Blank, DPMS or V/H Sync+Blank (default). You
can choose either DPMS or V/H Sync+Blank when ther
monitor has the Green function. You need to choose Blank
when the monitor has neither the Green function.
Video Off Method
Choose NA, Suspend, Standby (default) or Doze.
Video Off After
Assign the IRQ number to the modem which is being used
so that the ring signal can wake up the system. The
default setting is 3 (COM2).
Modem Use IRQ
Instant-Off (default): Turn off the system power at once
after pushing the power button.
Delay 4 Sec: Turn off the system power 4 seconds after
pushing the power button (to meet PC97/98
spec)
Soft-Off By PWR-BTTN
This mode sets the CPU speed down to 33MHz.
Doze Mode
These two options allow you to choose the mode for the
different timer. The Standby mode turns off the VGA
monitor, and the Suspend mode turns off the CPU and
saves the energy of the system.
Standby Mode
Time is adjustable from 1 to 15 minutes. When the set
time has elapsed, the BIOS sends a command to the HDD
to power down which turns off the motor.
HDD Power Down
Enabled: Turn on ACPI function.
Disabled (default): Turn off ACPI function.
ACPI Function