manualshive.com logo in svg

SOLTEK 65kv, User Manual, Page: 26 / 48

Share
Download
SOLTEK 65kv User Manual Download Page 26

65KV

26

Choose Enabled (default) or Disabled. This option allows
user to enable or disable the external cache memory.

External Cache

Default is “A , C, SCSI”. This option determines which
drive  to boot at first for an operating system.

Boot Sequence

Choose Enabled (default) or Disabled. This option allows
user to enable or disable the CPU internal cache.

CPU Internal Cache

Choose Enabled (default) or Disabled. This option allows
user to speed up the Power-On-Self-Test routine.

Quick Power On Self

Default is “A, C, SCSI”. This option determines which
drive  to boot at first for an operating system.

Swap Floppy Drive

Enabled (default): During POST, BIOS checks the track

number for Floppy Disk drive to see whether it’s
40 or 80 tracks.

Disabled: During POST, BIOS will not check the track

number for Floppy Disk drive.

Boot Up Floppy Seek

On (default): Activate the NumLock function at boot up.
Off: Close the NumLock function at boot up.

Boot Up NumLock

Note: Many diagnostic (or boot manager) programs which

attempt to access the boot sector table can cause
the above warning message. If you will be running
such a program, we recommend that you disable the

Enabled: Activates automatically when the system boots

up causing a warning message to appear if
there is anything attempting to access the boot
sector or Hard Disk partition table.

Disabled: No warning message will appear when there is

something attempting to access the boot sector
or Hard Disk partition table.

Virus Warning

Summary of Contents for 65kv

















































Reviews:

No comments