Fraxel
®
1550, Fraxel 1927 and Fraxel DUAL 1550/1927 Laser System
Part Number 10-05170 Rev. O
Page 36 of 92
The Operator shall measure the width of one half of the face. In order to begin, the
Operator must place the tip at the center of the philtrum (depression extending from the
base of the nose to the center of the lips) and complete a horizontal pass until the lateral
edge of the jawline (level with respect to the base of the earlobe). If the width measurement
was not completed properly, or needs to be repeated for any other reason, press “clear” and
perform the horizontal pass again. After the length and the width measurements are
obtained, the Operator must press “Done” in order to store the treatment area calculations.
