VII. Commissioning
Insert 4G SIM card (4G Option)
1. Insert the SIM card (A) into the sim card holder (B). Ensure the position of the connection points are
correct.
Warning: Only use this commissioning procedure together with the Ai-Charging app for
domestic applications. For all the other methods of commissioning, please contact your
local representative of the manufacturer.
The charger turns ON and a series of self-checks will begin, to ensure the charger works correctly and safety.
If the charger passes the self-check, the colour of the LED will illuminate green.
If the charger fails the self-check, the colour of LED will illuminate red.
3.To setup the EV charger:
Open and log into the Ai-Charging app.
Initial set up.
Find the EV Charger on the app.
Once the initial setup is done:
Adjust the parameter setting accordingly for the charger.
Connect your electrical vehicle to the charger.
Turn on the Charger via the app or by swiping the RFID card.
Check the charging current and status via the app.
(For Wi-Fi set-up, please refer to the Ai-charging app manual that can be found on our website).
1. To download the Ai-Charging app, please scan the QR code located on the last page of this guide.
The app is compatible with Android versions later than 8.0, and iOS mobile versions 12.1 or later.
2. Close the circuit breaker that supplies the power to the EV charger.
Warning:
Hazardous voltage
Be careful when you work with electricity
ENGLISH
9
Summary of Contents for SOL APOLLO Series
Page 135: ......
