Solo TOC-1, Owner'S Manual

Page: 39 / 144

4-7
Starting and Drive Selection
Drive Mode Selector
Shifting to R (Reverse) or D (Drive) when
the vehicle is moving in the opposite
direction could damage the drive system. These repairs would
not be covered by the vehicle warranty. Only shift into R or D
when the vehicle is stationary and the brake is applied.
This is a three-position dial, used to set the desired direction of
the vehicle.
The dial positions are as follows:
 R - Reverse
Use this position to back up.
Note: When R is selected, the instrument cluster displays the
view from the rear view camera. See “Back-Up Camera”,
page 4-17 .
 N - Neutral
In this position, the drive system does not drive the rear
wheel.
 D - Drive
Use this position to go forward.
The current position is illuminated on the dial, and is also
indicated on the instrument cluster display. See “Instrument
Cluster Display”, page 4-9 .
CAUTION