Solo TOC-1, Owner'S Manual

Page: 11 / 144

1-5
Safety Information
Warning Labels
Warning labels are located on the vehicle to alert the operator
and/or any service technicians who may be working on the
vehicle to potential safety hazards that exist, and to the related
precautions that must be taken. Always follow these warnings
to reduce the risk of serious injury or death and to ensure safe
vehicle operation and maintenance. If any label becomes
damaged, painted over, missing, or unreadable, have it replaced
immediately. Contact an ElectraMeccanica Authorized Repair
Facility.
Vehicle Modifications and Accessories
Installation and use of parts and
accessories on your SOLO that are not
approved by ElectraMeccanica may affect handling, exceed
the vehicle's weight rating, cause extensive damage to the
vehicle, interfere with the vehicle’s electrical system, or void
the SOLO New Vehicle Limited Warranties.
SOLO accessories are designed to complement and function
with other systems on your vehicle. Go to
store.electrameccanica.com to see the list of approved
accessories. ElectraMeccanica is unable to accept any liability
whatsoever for parts and accessories that have not been
approved.
Additional Required Equipment
Regulations (such as those issued by the Federal Highway
Administration, the National Highway Traffic Safety
Administration (NHTSA), or issued pursuant to the
Occupational Safety and Health Act (OSHA), and/or state
and local laws and regulations) may require additional
equipment for the way you intend to use the vehicle. The
registered owner is responsible for determining which laws and
regulations are applicable to the intended use of the vehicle, as
well as arranging for the installation of any required equipment.
Contact ElectraMeccanica for information regarding optional
equipment available for your vehicle. See “Customer
Assistance”, page 8-1 .
CAUTION