Solmetric PVA-1000S, User Manual

Page: 26 / 152

1 Getting Started
1-14
CAUTION A Caution calls attention to a procedure that, if not performed correctly, could result in
damage to, or destruction of, the instrument. Do not proceed beyond a caution note until
the indicated conditions are fully understood and met.
NOTE A Note provides important or special information.
Declaration of Conformity
A declaration of conformity is available upon request.
Cleaning
To remove dirt or dust from the external case and/or hard enclosure of the PVA-600
+
, use
a dry or slightly dampened cloth only.
WARNING To prevent electrical shock, disconnect the PVA-600
+
from the PV system and/or
battery charger before cleaning. Use only a dry cloth or cloth slightly dampened
with water to clean the external case and hard enclosure parts. Do not attempt to
clean internally.
Instrument Markings
The PVA-600
+
have the following markings on the front and/or rear panel. Familiarize
yourself with these markings before operating the PVA-600
+
.
The instruction manual symbol. The product is marked with this
symbol when it is necessary for you to refer to instructions in the
manual.
The cTUVus mark signifies that the product has been thoroughly
tested and specifically certified to comply with the electrical and
fire safety regulations of Canada and the United States.
This symbol indicates separate collection for electrical and
electronic equipment, mandated under EU law as of August 13,
2005. All electrical and electronic equipment are required to be
separated from normal waste for disposal. (Reference WEEE
Directive, 2002/96/EC.)
The IEC HV symbol indicates the presence of hazardous voltages.
Danger exists of electrical shock that can cause severe injury or
death.
This symbol marks the position of the power switch.