SIG-5600 User Manual Ver. 1.0
- 8 -
1.4.6
LED
LED operations according to each state are as follows:
When the supplied power is stable: PWR
When the supplied power is NOT stable: PWR
When the script is running: RUN
When the script is running: RUN
When a network is not connected: LINK
When a network is connected: LINK
When an IP address is not assigned: LINK
When a TCP connection is NOT established: STS
When a TCP connection is established: STS
When sending data to the TCP: MTX
When receiving data from the TCP: MRX
When the input/output port is OFF: Di0 ~ Di3, Do0 ~ Do3
When the input/output port is ON: Di0 ~ Di3, Do0 ~ Do3
