SIG-5600 User Manual Ver. 1.0
- 4 -
1
Overview
1.1
Introduction
SIG-5600 is an industrial I/O gateway equipped with 4 analog input ports, 4
digital input ports and 4 digital output ports. Users can remotely monitor the
values of sensors connected to the digital and analog input ports of this product
using Modbus/TCP. In addition, users can transmit ON/OFF signals to remote user
devices using the digital output port of this product.
1.2
Features
⚫
4 analog input ports: voltage or current
⚫
4 digital input ports: Wet Contact or Dry Contact input
⚫
4 digital output ports (Relay): both NO and NC output
⚫
Selectable input mode (voltage or current)
⚫
Modbus/TCP
⚫
Support multiple TCP connection (Max. 4 channels)
⚫
Free Modbus/TCP program
⚫
Industrial temperature range (-
40℃ ~ +85℃)
1.3
Specification
Digital Input
Input Type
Dry Contact / Wet Contact / NPN / PNP
Input Voltage Range
2.5V ~ 25V
Number of Ports
4 ports
Digital Output
Output Type
Relay (Type C - NO: Max DC 30V/5A with resistive load, NC:
Max DC 30V/1A with resistive load)
Number of Ports
4 ports
Analog Input
Input Type
Voltage (0V ~ 5V) or Current (4mA ~ 20mA / 0mA ~ 20mA)
Resolution
12 bits
Number of Ports
4 ports
Network Physical Interface
Wired LAN
10Base-T/100Base-TX Ethernet (RJ45)
Ethernet Speed Auto Sense
1:1 or Cross-over Cable Auto Sense
Wireless LAN
IEEE802.11b/g Wireless LAN with a USB dongle
Software Functions
Wireless LAN Mode
Infrastructure, Soft-AP
