P5H-153 User Manual > Layout
2021-12-10
Sollae Systems
page 5 of 13
2. Ethernet
Ethernet port supports 10/100Mbps Ethernet. This port is an RJ45 connector and it is mapped to
NET0 for programming.
3. Analog Input
4 analog input ports are an 8-pole (3.5mm pitch) terminal block. Each port is mapped 0 to 3 channel
of ADC device(ADC0/1/2) for programming. You must the input type of the each port. The input
type will be voltage(DC 0 ~ 5V) when you output LOW to each input type select pin. On the other
hand, the input type will be currentcurrent (0 ~ 20mA) when you output HIGH to the pin.
Port
Lable
Port assignment
Type select pin
Input 0
A0+, A0-
ADC0/1/2 ch.#0
UIO0.16
Input 1
A1+, A1-
ADC0/1/2 ch.#1
UIO0.17
Input 2
A2+, A2-
ADC0/1/2 ch.#2
UIO0.18
