CSW-H80 User Manual Ver. 3.0
- 25 -
4
Operation Modes
4.1
What is the Operation Mode?
Each of three operation mode is defined for specific purpose, and those are followed.
Normal mode
This mode is for normal data communication and has 4 different connection modes.
Configuring parameters is also available in this mode.
Serial configuration mode
This mode is for configuring environmental parameters through the RS-232 port.
ISP mode
This mode is only for changing firmware.
4.2
How to enter each mode
Figure 4-1 how to entering each mode
① Reset (Power off)
② Reset or input “g 0” command
③ Reset (After transmitting firmware, CSW-H80 will be automatically reset)
④ Reset pushing the function button
⑤ Push the function button for a while (over 1 sec)
⑥ Push the function button for a moment (less than 1 sec)
⑦ Turn the power on
