CSE-H55N User
’
s Manual Ver. 1.2
- 22 -
http://www.ezTCP.com
3.1.2 Configuration via Serial
Checklists
To use serial configuration, COM port of PC should be connected with CSE-H55N.
Because CSE-H55N doesn’t have a RS232 port, a RS232 to RS422/485 converter is
needed. Of course, CSE-H55N should be in operation as [Serial Configuration Mode].
Procedures
Figure 3-3 procedures for configuration via Serial
Step 2, Reading
Figure 3-4 reading procedure via serial
① Choose the [Serial] tab
② Select the COM port which the CSE-H55N is connected with
③ Open the COM port with the [Open] button
④ Load the setting with [Read] button
If you want to know more specific manners of setting, please refer to the document
“ezManager Users’ Manual” on the [Download] >> [Technical Document] of our
website.
Summary of Contents for CSE-H55N
Page 66: ......
